FOUR ADVANTAGES !
Professional amorphous silicon light sensor solar panel
The silicon solar panel yields high sunlight conversion efficiency and still performs under shade. As it is light sensory,it automatically charges the battery during the day and light up during the evening.
Stainless steel constructure
Made of high quality stainless steel,this solar-lighted house plaque has resistance to rust and corrode on moist and salty environment. This sturdy material allows it to hold up to a variety of weather,such as foggy days,snowy days,rain days,etc.
Easy to install
It is super easy to set up the solar door number light. There was no wiring needed and it comes with a built-in battery and two screw. Use a screwdriver to fix the screws/nail (come in the packages)in the wooden stake/wall and then hang the address marker by putting the two slots in the back of the main units into the screws.
Wide application
With this solar-powered address light, there is no missing and mistaking your house any more. Now your friends,family,deliveryman as well as visitors can easily identity the house number from the street in low lightning condition.It not only helps you get the food and parcel delivered to your home,but also plays a important role in locating your house for emergency assistance.
During the day the solar light will automatically switch off to save energy;
.
At night it will turn on automatically so you can find your way.
Step1:Use a screwdriver to fix the screws/nail in the wooden stake or wall.
Step2:Hang the light by putting the two slots in the back of the main units into the screws.
→ 
→ 
Step1:Unscrew the bottom screw and open the base.
Step2:Open the battery cover.
Step3:Replace with two new same type batteries.
Step4:Cover back the battery cover.
Step5:Screw on the two screws.
Q:Are the light bulb or batteries replacable?
A: It includes two environmentally friendly NI-MH batteries which could be replaced.
Q:How many numbers will it hold?
A: Four is easy enough, but five might be too crammed.
Q:How do i get my numbers on it?
A: Just peel off the numbers stamp and stick it to the surface of the address sign.
